Filter
Top Products
www.vtechphones.com
25
Basic operation
Handset settings
• The handset will
not ring when a
call comes in if
ringer volume is in
the lowest setting.
Ringer volume
• From the idle (off) mode, press SEL then or until RINGER VOLUME
is shown.
• Press SEL. The current ringer volume will be shown:
• Press and or enter a digit (0 through 6) to the desired ringer volume.
The current ring tone will play and the volume bar is increased or decreased
each time the setting is adjusted. At the lowest setting the display will
show:
-OR-
• From idle (off) mode, press +/- volume control keys on the side of handset
will directly go to the RINGER VOLUME menu.
• Press and to the desired ringer volume. Ringer volume will be
adjusted.
Ring tone
• From the idle (off) mode, press SEL then or until RINGER TONE is
displayed.
• Press SEL. You can then use or or enter a digit (0 through 9) to
sample the ring tone.
• Press SEL to conrm.
Key tone
• From the idle (off) mode, press SEL then or to KEY TONE.
• Press SEL. The current setting will be shown. Press or to scroll to
ON or OFF. When set to ON, the handset will emit a beep whenever a key
is pressed.
• When the desired option is shown, press SEL.
Handset name (preset to VTECH)
• You can give each handset its own unique name (such as kitchen or
ofce). The name is shown in the rst line when the handset is idle.
The name can be a up to 16 characters in length.
HANDSET NAME
VTECH_