www.vtechphones.com
5
Getting started
Installation
Choose a location
For maximum performance of your
cordless telephone system:
1. Choose a central location for
your base unit.
2. Install your base unit and
extension handset away from
electronic equipment such as
personal computers, television
sets and microwave ovens.
3. In locations where there are
multiple cordless telephones,
separate base units as far as
possible from each other.
4. Install your telephone equipment
away from heat sources and
direct sunlight.
5. Avoid excessive moisture, dust
or extreme cold.
Install handset battery
1.
2.
1. Align the two holes in the plug with
the socket pins, then snap the plug
into place.
2.
Place the battery in the compartment with
the wires in the upper right corner.
3. Replace cover by sliding it upwards until
it clicks into place.
4. Be sure to charge the battery for 16 hours
before using your phone.
• Use only the provided
VTech battery, or
equivalent.
• Place the handset in
its base or charger
when not in use to
ensure optimum
performance.
• CAUTION: To reduce
the risk of re or injury,
read and follow these
instructions:
1. Use only the battery
supplied, or equivalent.
2. Do not open or
mutilate the battery.
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin It may be
toxic if swallowed.
3. Exercise care in
handling battery in
order not to short the
battery with conducting
materials such as
rings, bracelets, and
keys. The battery
or conductor may
overheat and cause
burns.
1
3