Filter
Top Products
www.vtechphones.com
7
Getting started
• If the phone will
not be used for
a long period of
time, remove the
battery to prevent
possible leakage.
• If you have any
trouble installing
your phone,
please refer to the
Troubleshooting
section near the
end of this manual.
• When in low
battery mode, the
keypad sounds,
backlighting and
speakerphone
features will not
work. When the
battery has been
charged, these
features will return
to their normal
function.
Installation
Check battery indicator
If you receive a check battery warning, it indicates one of the following:
1. There is no battery in your handset. You need to install the supplied battery into your handset (see
Install handset battery on page 5.)
2. The battery needs to be replaced.
3. The battery has been installed incorrectly. Please reinstall (see Install handset battery) and/or
see the diagram in the battery compartment of the handset.
Check for dial tone
After the battery is charged, press on the handset. You should hear a dial tone. If not, see
Troubleshooting.