Filter
Top Products
www.vtechphones.com
41
Basic operation
Batteries
Battery care and performance
After the battery is fully charged, you can expect the following performance:
Operation Operating time
While in use (talking) up to 7 hours
While not in use (standby*) up to 3 days
* Handset is off the base unit or charger but not in use.
• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every ve seconds.
— The screen displays LOW BATTERY and the low battery icon.
• Place the handset in the base so the CHARGE light turns on. The battery is usually fully
charged in about 16 hours.
• You can keep the battery fully charged by returning the handset to the base or charger after each use.
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
replaced.
• To reduce the
risk of re or
injury to persons
or damage to the
telephone, read
and follow these
instructions
carefully.
• Charge the
battery provided
or identied
for use with
this product in
accordance with
the instructions
and limitations
specied in this
user’s manual.
Replace the handset battery
1. Remove the battery compartment cover on the handset by pressing
on the indentation and sliding the cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery’s plug with the socket pins,
and snap the plug into place. Snap the battery in the compartment,
as described in Installation on page 5.
4. Replace the cover by sliding it up into place.
5. The new battery must be fully charged before using the phone.
Place the handset in the base or charger and allow it to charge
for at least 16 hours the rst charge. The telephone might operate
before that, but for best performance, let the battery charge fully.