In-Sight
®
1700 Series Wafer Reader Section 7: Native Mode Commands
67
SETTING DESCRIPTION
<Char> The ASCII value of the specified character in a read string.
<CharSize>
The settings information for the Size setting.
High: 16 – 120 (default = 42)
Wide: 8 – 480 (default = 20)
<CheckSum>
The method by which the read result from a character string will be validated to ensure
reliability, and establishes the scoring basis for determining the pass/fail status of the
read.
0 = Virtual
1 = SEMI
2 = SEMI with Virtual (default)
3 = BC 412 with Virtual
4 = IBM 412 with Virtual
<Col>
The column coordinate of the input region or the individual character in a string.
4 – 640
<Color>
The expected color of the mark to read.
0 = Black
1 = White
2 = Auto (default)
<Config> The Config number (0-9).
<Dark>
Determines whether Dark Field Light Mode settings will be tried during tuning.
0 = Disable Dark Field tuning
1 = Enable Dark Field tuning
<Enable>
The status of the Enabled setting for the specified Config.
0 = Disable
1 = Enable
<FieldDef>
Specifies user-defined entries for the Field String.
User-defined
<FieldString>
The number of characters contained in the character string or encoded in a barcode.
alphanumerics (A-Z, 0-9), dashes (-), dots (.), spaces, and entries from FieldDef.
<Fixture>
The coordinates and orientation of the fixture.
Col: 4 – 640
Row: 4 – 480
Theta: 0 – 359
<Flag>
Specifies whether tuning will be performed on a Config.
0 = Start tuning
1 = Continue tuning
2 = Accept current parameters
<High> (CharSize)
The height of a 2D symbol or the average height of the characters in a string, as
measured in pixels.
16 – 120 (default = 30)
<High> (Region)
The height of the region (along the Y-axis) in which the wafer mark is expected to appear
in the field of view.
4 – 180 (default = 100)
<Char Index> Specifies the position number (zero-based) of a character within a string.
<LightMode>
Determines either a Bright Field or a Dark Field illumination effect on the mark.
0 = All lights are disabled
1 – 3 = The mark will appear dark on a light background
4 – 11 = The mark will appear light on a dark background
<LightPower>
The exposure time of the 1700’s CCD imager, in milliseconds.
0.000-33.000 (default = 2.000)
<Mark>
The type of wafer mark the selected Config will read.
0 = 2D Sym, T7 Data Matrix
1 = BC, BC 412
2 = BC, IBM 412
3 = BC, IBM 412 (Base 35)
4 = Chars, SEMI
5 = Chars, IBM
6 = Chars, Triple
