Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Making the Input Settings (Source Select)
Setting items Setting contents
iPod dock
Assign the control dock for
iPod input.
The control dock for iPod can be assigned to the
CD
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input sources.
Assign : Assign the control dock for iPod to the selected input source.
None : Do not assign the control dock for iPod to the selected input
source.
By default on first use, it is assigned to “VCR (iPod)”.
An input source to which control dock for iPod cannot be assigned is
displayed as “– – –”.
If control dock for iPod is not connected to the AVR-4310CI, assignment
of the “iPod dock” is disabled, and you can use it as a standard input
source.
•
•
•
Default
Reset all settings to factory
default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
If you select “Default” and press ENTER the message “Return all settings
to the default?” is displayed. Select “Yes” or “No”, and then press
ENTER.
See overleaf
Setting items Setting contents
Video Select
Change video input to your
preferred input source.
SOURCE : Play the picture and sound of the input source.
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
source to view. This can be set for individual input sources.
Set by either pressing <VIDEO SELECT> on the main unit or [VIDEO
SELECT] on the main remote control.
When operating from the main remote control unit
Press [VIDEO SELECT] repeatedly until the picture you want to see is
displayed.
To cancel, press [VIDEO SELECT], and select “SOURCE”
When operating from the main unit
After pressing <VIDEO SELECT> on the main unit, turn the <SOURCE
SELECT> on the main unit until the picture you want to see is displayed.
To cancel, press <VIDEO SELECT>, then turn <SOURCE SELECT> and
select “SOURCE”.
NOTE
It is not possible to select HDMI input signals.
The video select function does not work with HDMI signals.
Input sources for which “Delete” is selected at “Source Delete”
(vpage 42) cannot be selected.
•
•
•
•
•
Making the Video Settings (Video)
Default settings are underlined.
Setting items Setting contents
Digital
(Continued)
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
CD DVD HDP TV SAT/CBL VCR
Default
setting
COAX
3
COAX
1
None OPT 1
COAX
2
None
Input
source
DVR V.AUX SIRIUS
Default
setting
OPT 2 OPT 3 None
When control dock for iPod is used as the input source, assignment of
the digital input terminal is disabled, even if it is assigned.
b
Component
Set this to change the
component video input
terminals assigned to the
input sources.
The
DVD
HDP
TV
SAT/CBL
VCR
DVR
V.AUX
input sources
are assigned to the component video input terminals as shown below.
1-RCA (Component video 1) / 2-RCA (Component video 2) / 3-RCA
(Component video 3)
None : Do not assign a component video input terminal to the selected
input source.
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV
SAT/
CBL
VCR DVR V.AUX
Default
setting
1-RCA 2-RCA None None None 3-RCA None
An input source to which a component video input terminal cannot be
assigned is displayed as “– – –”.
When control dock for iPod is used as the input source, assignment of
the component video input terminal is disabled, even if it is assigned.
b
•
•
Setting
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
