Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
See overleaf
Setting items Setting contents
Audyssey DSX Settings
Adjust DSX setting and
sound stage parameters.
“Audyssey DSX Settings”
cannot be configured if the
HD Audio source being
played includes Front height
and Front wide channels.
In this case, the respective
channels are played back
using the input signals.
DSX : Provides more immersive surround sound by adding the new
channels.
ON : Set Audyssey DSX to expand surround.
OFF : Do not set Audyssey DSX.
•
•
Stage Width : Adjust sound stage width when using front wide speakers.
–10 ~ 0
Stage Height : Adjust sound stage height when using front height speakers.
–10 ~ 0
“DSX” can be set when you are using front height speakers or front
wide speakers.
“DSX” is only valid when using a center speaker.
“DSX” is valid when surround mode is STANDARD mode other than
PLgz Height.
“DSX” can be operated by <DSX> and [SPEAKER]. The “ ”
indicator lights on the display.
“Audyssey DSX Settings” cannot be configured if the HD Audio source
being played includes Front height and Front wide channels. In this case,
the respective channels are played back using the input signals.
About Audyssey Dynamic Surround Expansion (DSX)
Audyssey DSX is a scalable surround expansion system that adds new
channels to improve the surround impression. Based on research in
human hearing DSX adds a pair of Wide channels in the front because
that information is critical in the rendering of a realistic soundstage.
DSX then adds a pair of Height channels above the main front channels
to reproduce the next most important acoustical and perceptual cues
related to soundstage depth. In addition to creating these new channels,
DSX applies Surround Envelopment Processing to enhance the blend
between the front and side/back surround channels. The result is a much
more seamless and enveloping home theater experience.
•
•
•
•
•
•
•
Playback
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
Audyssey Settings
(Continued)
Dynamic Volume : Solves the problem of large variations in volume level
between TV, movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user’s preferred volume
setting.
ON : Use the “Dynamic Volume” equalizer. The Dynamic Volume effect
will be at the level of the “Setting” (vpage 76).
OFF : Do not use the “Dynamic Volume” equalizer.
“ ” is displayed when set to “ON”.
When “MultEQ XT” is set to “OFF”, “Dynamic Volume” is automatically
set to “OFF”.
You can also press [DYNAMIC VOLUME] to set.
Dynamic EQ / Volume : ON
“Green” “Red”
Dynamic EQ : ON / Volume : OFF
About Dynamic Volume
Audyssey Dynamic Volume™ solves the problem of large variations in
volume level between television programs, commercials, and between
the soft and loud passages of movies.
Audyssey Dynamic EQ™ is integrated into Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity remain
the same.
•
•
•
•
•
Setting : Set “Dynamic Volume” equalizer effect.
Midnight : High setting affects volume the most, causing all sounds to
be of equal loudness.
Evening : Middle setting prevents loud and soft sounds from being
much louder and softer respectively than average sounds.
Day : Low setting provides the least adjustments to the loudest and
softest of sounds.
Can be set when “Dynamic Volume” is set to “ON”.
•
•
•
“Green” “Red”
