A SERVICE OF

logo

Effective 4/00
Page 11
IL 33-FX6-1
G. Remove the Charging Handle. It will be
reinstalled later in the Retrofit Process.
For Kits Supplied with a Breaker Mounted CPT
Only.
STEP 7: INSTALLING THE BREAKER
MOUNTED CPT
Fig. 16 Overview: CPT Installed in the Breaker
A. Align the CPT with the holes in the CPT
Mounting Bracket, as shown. Secure the CPT
to the CPT Mounting Bracket using the (4)
.190-32 × .625" screws, (4) lock washers, (8)
flat washers, and (4) nuts supplied.
Fig. 17 CPT Mounted to the CPT Mounting
Bracket