General Printer Maintenance
WARNINGS:
•
Opening the printer exposes the fuser,
the
orange area
marked with a caution label. This unit is very hot, so
be careful
not
to touch it.
•
This procedure exposes the green drum unit. Because
the drum is light-sensitive, it should
not
be exposed to
room light for any longer than necessary (a few
minutes at most). Thus, it is recommended
that you
cover the drum unit with a soft cloth or sheet of paper
whenever the drum is exposed.
3.
Locate the main charger wire, which extends along
the
length of
the green drum inside a slot directly over the drum. This wire is
thin and difficult to spot instantly.
CAUTIONS:
l
When cleaning the main charger wire, be careful not to
press too hard. The wire is delicate and can break if
you apply too much pressure to it.
l
Avoid dripping alcohol on the drum.
Maintenance and Transportation
6-29
