The Control Panel
SET
CONTINUE/RESET
MANUAL
Press this button to switch from a
SelecType function to a list of options for
that function and to set SelecType options.
This button has several functions.
Printing data in buffer - When
the
printer
is
on
line and print data is in the buffer and
no
new
data is received within five
seconds, the message DATA IN BUFFER
appears. Pressing the
CONTINUE/RESET
button at that time clears the buffer by
printing a page.
Resetting the printer - When the printer is
off line, holding this button down for three
seconds clears the buffer, resets printer
functions to their current SelecType
settings, and clears temporary soft fonts
and temporary macros. The message
RESET
appears briefly in the display.
Clearing certain error messages - When
certain error
messages
appear in the
display, this button can be pressed to clear
them and set the printer
on
line. Pressing
this button also overrides paper size
messages. See the Error Messages section
in Chapter 7 for more information.
The
CONTINUE/RESET
button also has
several functions related to SelecType. See
the section on
the
SelecType control panel
for details.
When
the
printer is off line, use this button
to alternate between manual and automatic
paper feed modes.
Using the Printer
3-5
