Error Messages
This chapter discusses problems you may encounter with your
printer and their likely solutions.
The first section of
this
chapter describes error messages and provides
possible solutions. The remaining sections are designed to help you
solve problems that may occur while you are using the printer.
When an error occurs, the error
light
comes on and a message
appears in
the
display on the control panel. The message tells you
what may
be wrong and, in some cases, indicates the actions you
should take to correct
the
problem.
This section
contains
a list of error
messages
you may encounter
while printing. Each error message is followed by the steps you
need to take to correct the problem.
Certain problems require service by an Epson Customer Care
Center. Call the Epson Consumer Information Center at
1-800-922-8911 for a referral to a Customer Care Center.
Notes:
When a problem has been corrected, you may
need to
press
the ON LINE
button to resume printing.
Certain problems require that you press
the CONTINUE/RESET
button to continue printing. However, when the AUTO
CON T
SelecType option is set to
ON, the printer automatically clears the
error and resumes printing for
the
following error messages:
PS CHANGE
ERROR 21
ERROR 40
ERROR 20
ERROR 22
When the
AUTO CONT
SelecType option is set to
ON,
your
printer resumes printing even though the problem may not
have been fixed. This may cause a problem with your printed
output.
