A SERVICE OF

logo

Assembling the Printer
Attaching the power cord
1.
Before attaching the power cord, make sure that the power
switch on the left side of
the
printer is turned off. (It is off
when
the O side of the switch is pushed down.)
2.
Attach the power cord to the socket at the back of the printer, as
shown below. Then plug the other end of the power cord into a
properly grounded outlet.
Note: Do not connect the printer to your computer until the next
chapter.
Setting the paper feed mechanism
Follow the steps below if you are using the printer for the first time
or if you
have
just transported the printer:
1.
Be sure the printer is turned off; then remove the paper cassette.
2.
Turn on the power by pressing
the
side of the power switch
marked with the vertical bar. The power indicator lights and a
PAPER EMPTY
message appears.
Setting Up the Printer
1-23