Installation Procedure - 23
Installation
This section provides an example of projector installation, and explanations on the projec-
tion distances and projection angles.
■
■■
■
Installation Procedure
Determines the projection angle and projection distance to ensure the most suitable screen
display.
Installation example
The projector may be installed in locations that conform to the installation conditions and pro-
jection methods.
Viewing projected images from the front
Caution
· Do not block the ventilation outlet at the back of the projector or the Air Filter (suction inlet) on
the rear panel.
· There are cases where material or paper get sucked onto the Air Filter on the rear panel when
the projector is in use, so attention must be paid to prevent this.
· Do not place the projector in a location where it is subject to the direct air flow from air condi-
tioners or heaters.
· When the projector is to be placed near a wall, ensure that there is at least 20cm of space
between the wall and the projector.
· Do not cover the projector with table cloths or other material.
