Menu Operations - 71
Setting Sleep Mode Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.
ON
Reset Returns all setting menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to
the default settings. (see page 72
)
-
Cap-
ture
Image capture Captures the projected image and saves it on the memory
card as a JPEG format image file.
It is possible to view images saved onto the memory card
and copy them onto computers connected to the network
with the EasyMP.net Easy Review and Easy File functions.
(see page 73
)
-
User’s Logo
Capture
Registers user logos. (see page 75
)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
·The saving procedure requires a certain amount of time to
complete. Do not attempt to operate the projector or the
equipment connected to the projector while this procedure
is running. Failure to observe this may result in damage.
·The size that can be registered is 400 x 300 dots.
·The display size will be adjusted when video images are
being projected.
EPSON logo
Ad-
vanced
Language Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language
from the language selection menu displayed.
·The EasyMP.net screen is displayed in three interface
languages only English, German and French. Even if
another interface language is selected, the display language
will not change.
English
Startup Screen Displays the user logo during warm-up after the power has
been switched on.
·The user logo must be registered and set up before it can be
amended.
OFF
Color Setting Adjusts the color temperature* of the image.
Auto: Automatically adjusts the color settings.
Manual: Press the [Enter] button and select the required item
from the color setting menu displayed.
·Set the color temperature value to the yardstick value.
·The black level and white level settings are only used when
multiple projectors are used in the stack formation.
Auto
To p
Menu
Sub Menu Function Default Value
