A SERVICE OF

logo

72 - Menu Operations
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
· The information menu displays the status of the input source settings being projected.
· If a message stating [Image capture failed] is displayed on the screen, there is a possibility that a
system error occurred with EasyMP.net. Switch the projected image across to EasyMP.net and
resolve the system error before moving onto the next procedure.
Ad-
vanced
Comp2 Sync
Te rmin at i on
Sets the Computer #2 termination mode to enable image pro-
cessing from a Port.
On: Terminated in analog (75
)
OFF: TTL input
·Usually used at [OFF]. Set at on with the switcher when
analog 75 termination is required.
OFF
Rear Proj. Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.
OFF
Ceiling Set at [ON] to project images when suspended from the ceil-
ing. The projected image can be be inverted from left to right
and up and down.
·The optional ceiling suspension unit is required to suspend
the projector from the ceiling.
OFF
Reset Returns all advanced setting menu adjustment values to the
default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to
the default settings.
-
About (Displays the current settings) -
Reset
All
Execute Returns all items in the set-up menus to the default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Execute the [Reset] function from each individual sub menu
to return the image and sound settings to the default values
for each menu.
·The Users Logo Capture, Lamp ON Time, language and
BNC settings cannot be restored to the default values.
Perform the reset procedure after the lamp has been
replaced. (see page 97
)
-
To p
Menu
Sub Menu Function Default Value