Control Panel
After connecting your LX-90 to your computer, turn on the printer
and look at the control panel, which is shown in Figure
l-4.
I
Figure 7-4. Control panel
You have already used the control panel for a special purpose,
printing the self test. Here are the main functions of the lights and
buttons on this panel:
l
The POWER light glows green when the power is on.
l
The READY light glows green when the printer is ready to accept
data. Don’t worry if this light flickers somewhat during printing;
this flickering is normal.
l
The PAPER OUT light glows red when the printer is out of paper or
the paper is loaded incorrectly.
l
The ON LINE light glows green when the printer can receive data.
In addition to the lights, the control panel has three buttons.
l
ON LINE-switches the printer between on line and off line status.
When the printer is on line, the ON LINE light glows and the printer
is ready to accept data.
6
