A SERVICE OF

logo

ESC EM
Cut Sheet Feeder Control
Format:
ASCII code:
ESC EM (n)
Decimal:
27
25 (n)
Hexadecimal: 1B
19 (n)
Comments:
Used with the optional cut-sheet feeder. When n = 0 the feeder is
turned off, when n = 4 it is turned on. Using DIP switch 1-3 pro-
duces the same effect.
ESC a
Disable Paper-Out Sensor
Format:
ASCII code:
ESC
8
Decimal: 27
56
Hexadecimal: 1B
38
Comments:
Turns off the paper-out sensor
so that
you can print to the end of a
single sheet of paper. This command duplicates the function of DIP
switch 1-5. Some computer systems ignore this command. See page
D-3.
ESC 9
Enable Paper-Out Sensor
Format:
ASCII code:
ESC
9
Decimal: 27
57
Hexadecimal: 1B
39
Comments:
Turns on paper-out sensor so that the printer beeper sounds and
printing stops when the printer runs out of paper.
C-25