Configuring NetDAQ Logger for Windows
Configuring the netdaq.ini File
3
3-29
The configuration file is now saved as an ASCII text file. You can open the text
file for viewing or printing from an application such as Notepad. Refer to Figure
3-5 for a typical text file.
INSTRUMENT CONFIGURATION - 02
Description: (None)
Model: 2640A
Trigger Type: Interval
Interval 1: 1.000 sec
Interval 2: NA
Reading Rate: Slow (High Res.)
Drift Correction: Yes
Duration: NA
Temp Units: Celsius
Monitor Chan: None
Total Debounce: Yes
Data File: None
File Mode: NA
File Format: NA
Chan Function Range Alarm 1 Alarm 2 Trg Mx+B Units Label
0101 VDC 3V OFF OFF NA OFF VDC Label
0102 VDC 3V OFF OFF NA OFF VDC Label
0103 VDC 3V OFF OFF NA OFF VDC Label
Figure 3-5. Configuration Text File
Configuring the netdaq.ini File 3-38.
You can modify the netdaq.ini file in the same manner as any text file. Exit
and restart NetDAQ Logger to put the changes into effect. Refer to the default
netdaq.ini file shown below.
[Defaults]
MemoryWrapAround=True
AlarmCheckingIntvl_2640A=1.000
AlarmCheckingIntvl_2645A=0.100
AutoScanDisable=True
CommTimeout=10
[TL Defaults]
TLDir=c:\Program Files\Fluke\tl
TLFile=tl32.exe
TLTitle=Trend Link for Fluke
