Figure D-3 SD64 Space Requirements
Equipment Footprint Templates
Equipment footprint templates are drawn to the same scale as the floor plan grid (1/4 inch = 1
foot). These templates show basic equipment dimensions and space requirements for servicing.
The service areas shown on the template drawings are lightly shaded.
Use equipment templates with the floor plan grid to define the location of the equipment to be
installed in the computer room.
NOTE: Photocopying typically changes the scale of copied drawings. If any templates are
copied, then all templates and floor plan grids must also be copied.
Computer Room Layout Plan
To create a computer room layout, follow these steps:
1. Remove several copies of the floor plan grid from this appendix.
2. Cut and join them together (as necessary) to create a scale model floor plan of the computer
room.
3. Remove a copy of each applicable equipment footprint template.
Templates 185
