A SERVICE OF

logo

Open as PDF
next previous
60133 revG Page 27 of 38
FIGURE 67
8. Install the supplied 2.50” silicone hump connector (P/N #30380-4) to the other end of the pipe that is
connected to the throttle body, securing it with a 2.50” t-bolt clamp (P/N #30275-250).
9. Connect intercooler pipe assembly (P/N #21241) from the throttle body pipe to the pipe (P/N #21240) with
the 6.50” long silicone hose. Secure pipes with the supplied 2.50” t-bolt clamps. SEE FIGURE 68 & 69
FIGURE 68 FIGURE 69
FIGURE 70 FIGURE 71
10. Install the rubber isolator (P/N #31067) into the original factory air box mounting hole. SEE FIGURE 72
PIPE P/N #21241
SIDE TO THE
6.50” LONG
SILICONE HOSE
CONNECTOR