A SERVICE OF

logo

Open as PDF
next previous
60133 revG Page 29 of 38
FIGURE 75
13. Install the supplied AEM Dry-Flow air filter (P/N #31080) to the other side of pipe assembly (P/N #21238).
Re-install the factory mass air sensor on to machined flanged on the pipe. Bolt the sensor to the pipe
using the supplied socked head allen bolts (P/N #31071). Don’t forget to plug the sensor. SEE FIGURE
76 & 77
FIGURE 76 FIGURE 77
14. Cut the supplied 5/8” hose (P/N #30827) to 11.0”. Slide one end onto the turbo-to-filter pipe and the other
end onto the engine’s valve cover. Secure using supplied band clamps. SEE FIGURE 78, 79, & 80
FIGURE 78 FIGURE 79
PIPE P/N #21238
MASS AIR SENSOR FLANGE