4–9SCANTEAM 3700 Wedge Technical Manual
Code I.D. Transmit
AIM I.D. Transmit
This programming selection allows you to enable or disable transmission of a
Code I.D. before the decoded bar code symbology. (See the Symbology Chart
on page 4-5 for the single character code that identifies each symbology.)
Default = Disable.
This programming selection allows you to enable or disable transmission of an
AIM I.D. before the decoded bar code symbology. (See AIM Guidelines on
Symbology Identifiers for more information on the AIM symbology ID
characters.) Default = Disable.
Function Code Transmit
When this programming selection is enabled, andfunction codes are contained
within the scanned data, the 3700 Wedge transmits the key code (which
corresponds to the decoded ASCII function code) to the terminal. ASCII
function codes are represented by the HEX values 00-1F. (Charts of these
function codes are shown in Section 7, Supported Interface Keys.)
Default = Enable.
Enable
✱ Disable
Enable
✱ Disable
✱ Enable
Disable
