Prestige 201 ISDN Access Router
10-10 Backup, Restore and Upload
Step 5. Use the command “put” to transfer files between the Prestige and the workstation. The file name
for the firmware is “ras” and for the configuration file “rom-0” (rom-zero, not capital o).
Figure 10-11 FTP Example
The system reboots after a successful upload.
Using FTP client software
Step 1. Rename the local firmware and configuration files to 'ras' and 'rom-0', because we can not
specify the remote file name in the FTP client software.
Step 2. Use FTP client from your workstation to the Prestige 480 and log in by entering the IP address of
the Prestige.
Step 3. Set the transfer type to 'Auto-Detect' or 'Binary'.
Figure 10-12 Edit Host
220 P201 FTP version 1.0 ready at Thu Jan 8 18:00:02 1970
User (201.x.x.x:(none)): <Enter>
331 Enter PASS command
Password:
230 Logged in
ftp> bin
ftp> ha
200 Type I OK
ftp> put rasp201.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
