Prestige 201 ISDN Access Router
8-2 System Maintenance
8.1 System Status
The first selection, System Status gives you information on the status and statistics of the ports, as shown
below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ISDN telephone line status, number of packets sent and number of packets received.
To get to the System Status, enter 24 to go to Menu 24 - System Maintenance. From this menu, enter 1,
System Status. There are five commands in Menu 24.1 - System Maintenance - Status. Entering 1
disconnects the current B1 channel call; 2 disconnects the current B2 channel call, 3 resets the counters, 4
drops both B1 and B2 and ESC takes you back to the previous screen.
The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Figure 8-2 Menu 24.1 - System Maintenance – Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status.
Menu 24.1 -- System Maintenance – Status
Chan
--
--
Link
Down
Down
Type
0Kbps
0Kbps
--
--
Own IP Address
Peer IP Address Peer CLID
Status
Down
TX Pkts
4
Collision
0
Total Outcall Time: 0:00:00
LAN Packet Which Triggered Last Call:
Press Command:
COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All ESC-Exit
