Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
149
The following table describes the labels in this screen.
7.5.4 Expire Time
Use this screen to see or edit the length of time the V500 waits after receiving an auto-
provisioning file before it requests another.
Enable and select Advanced Setting > Auto Provision > Expire Time. The following screen
displays.
Figure 112 LCD Menu: Auto Provision Expire Time
The following table describes the labels in this screen.
Table 86 LCD Menu: Auto Provision Server Port - Edit
LABEL DESCRIPTION
Current This shows the auto-provisioning server’s listening port number already
configured on the V500.
New Enter the new listening port number.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
<- Press this to delete a character.
Back Press this to return to the previous screen.
Expire Time
Current Timeout (sec):3600
Edit Back
Table 87 LCD Menu: Auto Provision Expire Time
LABEL DESCRIPTION
Current Timeout This shows the expire time already configured on the V500.
Edit Press this to change the expire time.
Back Press this to return to the previous screen.
