A SERVICE OF

logo

Chapter 11 SIP Account Setup
V500 Series User’s Guide
179
Each field is described in the following table.
Table 106 VoIP > SIP > SIP Settings
LABEL DESCRIPTION
SIP Settings
SIP Account Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
Active Select this if you want the V500 to use this account. Clear it if you do not want the
V500 to use this account.
Account
Name
This is the name that appears in this SIP account’s tab on the LCD screen. You
can enter up to 20 printable English keyboard characters, but only the first 6 show
up on the LCD screen account tab.
Number Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 50 printable English keyboard characters.
SIP Local Port Enter the V500’s listening port number, if your VoIP service provider gave you
one. Otherwise, keep the default value.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 32 printable English keyboard characters. It
does not matter whether the SIP server is a proxy, redirect or register server.
SIP Server
Port
Enter the SIP server’s listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
REGISTER
Server
Address
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 32 printable English keyboard
characters.
REGISTER
Server Port
Enter the SIP register server’s listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 32 printable English keyboard characters.
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Clear this if you do not want to send identification.
Voice Mail
Number
Enter the voicemail number associated with this SIP account.
Paging
Number
The paging feature allows you to call a group of extensions simultaneously. When
this is configured and you press the PAGING key on the V500, all the extensions
in the group automatically go into speakerphone mode.
Your system administrator must set up paging groups on the network, and you
must know the paging number for the group. Enter the group number in this field.
DNS SRV Select this to use the DNS server(s) you configured in the Network > Ethernet >
Internet Connection screen.
Backup SIP
Server
1st / 2nd
Backup SIP
Server
Select the check box to have the V500 use the backup SIP server(s) you
configure. If the V500 cannot use the server you configured in the SIP Settings
section of this screen, it tries to use the backup server(s). It tries to use the 1st
Backup SIP Server and, if it cannot connect, then tries to use the 2nd Backup
SIP Server.
SIP Service
Address
Enter the IP address or domain name of the backup SIP server provided by your
VoIP service provider. You can use up to 32 printable English keyboard
characters. It does not matter whether the SIP server is a proxy, redirect or
register server.