Chapter 3 Tutorials
V500 Series User’s Guide
50
3.4 Placing a Call
Placing a phone call on your V500 is as easy as with any other phone, although you have a
greater variety of options available to you with this one. First and foremost you can have up to
4 separate phone lines with their own VoIP numbers all on the same unit so choosing which
line to use may seem like a daunting task (it’s not, but if this is your first experience with the
V500 it is easy to understand how it could be).
To place a call with the V500:
1 Ensure that your phone is already set up properly. If it is, your phone number appears on
the right hand side of the LCD screen. If you have multiple VoIP accounts configured
for your V500, then the currently selected account is highlighted by a black bar.
2 Press the Account Key that corresponds to the phone number you want to use to dial
out. If you only have one VoIP account set up then you can skip this step as that account
is always chosen automatically by default.
3 The speaker activates, presenting you with a dial tone. Simply enter the number of the
phone you want to call and talk into the microphone. If you need privacy, you can lift the
handset at any time to talk directly into it.
