Chapter 4 Using the LCD Screen
V500 Series User’s Guide
63
4.4 Working with the LCD Menus
Once you are familiar with the navigation and keypads, it is actually quite easy to move about
within the LCD menu system. As described in previous sections, the navigation pad gives you
the freedom to open menus and make menu selections while the keypad allows you to
configure the specific features that require your direct input.
For example, to activate your V500’s DHCP setting, you would:
1 Press the MENU key to open the Menu Setting screen.
2 Press 6 on your phone’s keypad to open the Advanced Setting menu.
If you use the navigator to highlight option 6 instead, then you must press Select to
actually open the menu.
3 Press 1 to open the Network Setting menu.
4 Press 3 to select the DHCP option, and then press On or Off to toggle it.
Figure 9 Drilling Down
4.4.1 LCD Menu Syntax Conventions
Throughout this manual, whenever a menu item is designated for configuration the option is
listed in the following format: MENU > Path > Option.
For instance, to set the DHCP status of your phone (continuing with the example from the
previous section) the menu item for the configuration option would be displayed as:
MENU > Advanced Setting > Network Setting > DHCP (Off).
