Chapter 12 Network Address Translation (NAT)
VSG1435-B101 Series User’s Guide
181
Note: Many residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP may
periodically check for servers and may suspend your account if it discovers any
active services at your location. If you are unsure, refer to your ISP.
Configuring Servers Behind Port Forwarding (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in
the example), port 80 to another (B in the example) and assign a default server IP
address of 192.168.1.35 to a third (C in the example). You assign the LAN IP
addresses and the ISP assigns the WAN IP address. The NAT network appears as a
single host on the Internet.
Figure 63 Multiple Servers Behind NAT Example
Click Network Settings > NAT > Port Forwarding to open the following
screen.
See Appendix E on page 385 for port numbers commonly used for particular
services.
Figure 64 Network Settings > NAT > Port Forwarding
A=192.168.1.33
D=192.168.1.36
C=192.168.1.3
B=192.168.1.34
WAN
LAN
192.168.1.1
IP Address assigned by ISP
