Chapter 22 Service Control
VSG1435-B101 Series User’s Guide
270
Click Security Settings > Service Control to open the following screen.
Figure 125 Security Settings > Service Control
The following table describes the fields in this screen.
Table 94 Security Settings > Service Control
LABEL DESCRIPTION
General
# This is the index number of the entry.
Services Name This is the service you may use to access the ZyXEL Device.
LAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Certificate
HTTPS Certificate Select a certificate the HTTPS server (the ZyXEL Device) uses to
authenticate itself to the HTTPS client. You must have certificates
already configured in the Certificates screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to restore your previously saved settings.
