Chapter 14 IGMP
VSG1435-B101 Series User’s Guide
212
14.3.3 IGMP Host Limitation Add
Use this screen to control a LAN host’s access to an IGMP multicast service
domain. Click Network Settings > IGMP Setting > IGMP Filter > Add a new
host limitation to open the following screen.
Figure 86 Network Settings > IGMP Setting > IGMP Filter > Add a new host
limitation
The following table describes the fields in this screen.
Table 60 Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation
LABEL DESCRIPTION
Service Specify the name of the IGMP multicast service domain to which you
want to block or allow access.
LAN Host Select the IP address of one of the ZyXEL Device’s LAN hosts.
IGMP Enabled Select whether or not the LAN device using the specified IP address is
allowed to use the IGMP multicast service domain.
Max Allowed
Channels
This shows to how many of the IGMP multicast service domain’s
channels the LAN device using the specified IP address can subscribe.
IGMP Enabled Select whether or not the LAN device is allowed to access IGMP
services through the ZyXEL Device.
Max Allowed
Channels
Specify to how many IGMP channels the LAN device is allowed to
subscribe.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to exit this screen without saving.
