Filter
Top Products
28 CHAPTER 4: INITIAL HANDSET CONFIGURATION
Before you can use your phone, you will need to enter the profile menu
and create a network profile. You can create up to six different network
profiles, although you can activate only one profile at a time.
First Step: You are required to set a password for the profile menu. A
pop-up message displays on the screen “No Password! Please Create a
New Password.” After the profile menu’s password is set, you need to
enter the configured password to enter the profile menu.
The next step after creating a network profile is to specify the parameters
for the SIP account that you will associate with this network profile. You
can create up to six different SIP Accounts. To complete your profile
configuration, you must activate the network profile. These tasks are
described in the remaining sections of this chapter.
Entering the
Network Profile
Settings
To configure a network profile:
1 Press Menu and then press to select Profile.
2 Enter the Profile menu’s password.
3 Press to select the Network Profile menu option and then select
the profile you want to edit from the list.
If you are setting up a new profile, select an unused profile from the list (for
example, <profile>). Press
and select Rename to give an
appropriate name to the profile.
4 To edit the settings for the selected network profile, press and select
edit. The Network Profile settings are located in the submenus for
Wireless, IP, Account Choice, Hotspot Choice, and NAT.
5 Edit your Wireless Settings as necessary. Table 8
describes the available
options.