Filter
Top Products
32 CHAPTER 4: INITIAL HANDSET CONFIGURATION
5 Press to confirm your settings.
After defining the SIP Account settings, you must associate the SIP
account with a particular network profile in order for the Wireless phone
to use these settings. To do this, you name the specific SIP account in the
Account Choice menu option of the active Network Profile. For details,
see “Entering the Network Profile Settings” earlier in this chapter.
Activating a
Network Profile
Your Wireless Telephone can have up to six different network profiles
defined to support connections to different WLANs and/or SIP proxy
servers.
Only one network profile in your Wireless telephone can be active at a
time.
Follow these steps to activate the network profile you require for
operating your Wireless Telephone:
1 Press Menu and then press to select the Profile.
2 Enter the profile’s password.
3 Select Network Profile to display the list of network profiles
4 Select the Network Profile you want to make active.
5 Press Select and ensure that Auto Detect is set to On.
6 Select Move and press to move the profile you want active to the
top of the list.
7 Press Back and then select Network Profile again. The active
profile in the list is indicated by check mark next to it. (If the profile has
Auto Detect set to Off the displayed icon will be indicated as .)
Return to Menu and go to Tools > Restart. Press OK to restart the
phone.
Codec: Compressed audio format.
Pkt Time (ms): Audio transmitting interval.
OutBand DTMF: The working of out-of-band dual-tone multifrequency.
Table 11 Advanced SIP Parameters