AT&T 2 Cell Phone User Manual


 
Switching Your Phone On/Off
Make sure the SIM card is in your phone and the battery is charged.
• Press and hold the Power Key to turn on your phone.
• To turn it off, press and hold the Power Key to open the options menu.
Tap Power off > OK.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or reset it to factory
settings (see Phone Settings – Factory Reset), you need to set up your phone
settings before using it.
 Scroll the language list to highlight the language you need and then
tap Start.
 If you have a Gmail account, tap Yes to sign in to Google. Tap No if you do not
have an account.
 To create a Google account, tap Get an account. You can also tap
Not now to set up an account later.
 Configure the Google location options and tap
.
 Set up date and time and tap
.
 Input your name and tap
.
 Read the Google services information and tap
.
Tap Finish to complete setup.
Switching to Sleep Mode
To save battery power, Sleep Mode suspends your phone in a low-power-
consumption state while the display is off. Your phone also goes into Sleep Mode
by itself when the display is automatically turned off after a certain period of time,
3Getting Started
Inserting a microSD
Card
 Insert a microSD card (not included) with
the gold-colored contacts facing down.
 Replace the back cover.
Removing the Battery and
SIM/microSD Card
 Power off your phone.
 Remove the back cover.
 Lift the battery up and out.
 Slide the SIM card out.
 Slide the microSD card out.
Charging the Battery
Note: For best performance, charge the battery
fully prior to using the phone for the first time.
 Insert the charger’s connector into the
charging port. Be sure to insert the
connector in the correct orientation.
Do not force the connector into the port.
 Plug the charger into a standard
AC wall outlet.
 When the battery is fully charged,
unplug the charger and disconnect
it from the phone.
2 Getting Started