Filter
Top Products
Menus 99
CSD/GPRS: Use the dialup network preferentially. Only if
there is no dialup network will the GPRS network be used.
CSD: Use only the dialup network.
• GPRS: To modify settings for a GPRS account, press (Edit)
to edit the settings in each field. GPRS settings include the
following fields:
APN: Enter the APN (Access Point Name) assigned by your
network operator.
User Name: If needed, enter the user name provided by your
network operator.
Password: If needed, enter the account password provided by
your network operator.
• CSD: If you are using a GSM network, you must configure and
activate a CSD account. Press (Edit) to edit the settings in
the following fields:
Dial Number: When you start up the browser to connect to
the Internet, you phone will dial this number. Your telecoms
network operator or ISP will provide this number to you.
User Name: This is your user account name, and is provided
by your network operator.
Password: The account password provided by the network
provider.
/
A dialup network is a GSM Circuit Switch Data Service (CSD
for short). Using a dialup network can be likened to using a
home computer's modem, in that before connecting to the
Internet a number must be dialed. As for GPRS, it like the
LANs used at company, where users do not need to dial a
number to access the network. Regular GSM users who are
not using a GPRS network system can only have a dialup
connection to the Internet.