Filter
Top Products
5
RACK MOUNT INSTALLATION
1. Rack mount installation of the 2U POD is possible with the use of
the rack mounting brackets (shipped with the POD). See
Figure 3.
2. The rack mount brackets allow you to rack mount the POD in a
19" enclosure (23" to 19" rack adapters are available as options
from Liebert if you are using 23" Foundation or equivalent cabi-
net).
3. The POD can be mounted to face one of four directions depending
on your application, and utilizing the rack mount brackets pro-
vided.
4. Conduit entry is possible on two sides of the POD. Plan POD ori-
entation to allow for wiring. Determine the desired position and
direction for the POD, face it in that direction, and then attach the
brackets to the POD with the screws provided.
5. Consult your rack/enclosure manufacturer’s recommendations for
specific rack mounting hardware that will be required.
6. The holes on the rack mount bracket are notched for easy installa-
tion. Tighten the POD securely to the rails and then follow the
startup directions for the POD in Installation on GXT 2U UPS.
Figure 3 2U Hardwire POD with rack mounting brackets
UPS
AVAILABLE
UPS
UPS
UTILITY
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
IF UTILITY LAMP IS ILLUMINATED
MAINTENANCE BYPASS POSITION
MAY BE SELECTED
SWITCH TO UPS POSITION ONLY
WHEN UPS LAMP IS ILLUMINATED
CAUTION
LOAD
UTILITY