Filter
Top Products
Checking the first characters
If you have entered more characters than can beseen in
the display, the first characters will be replaced bythe
symbol. To check the first characters:
l press the navigation key
RIGHT.
Receiving a Call
When you receive a call, the phone ringsand the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note! The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Open the flip.
If the flip is already open; press
YES.
When the call is finished, press NO;
or close the flip.
Tip! To mute the ring signal when you receive a call, press
CLR.
To Reject the Call
There are two ways of rejecting the call:
• Press the
NO key.
• Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your I 888 WORLD conveniently lets you redial the last
phone numbers you have called (15 or more, depend-
ing on your SIM card). It can also redial a number auto-
matically if the connection failed when you firstcalled.
To Redial Previously Called Numbers
Press YES. The display now shows the last di-
alled number.
Press the navigation key RIGHT or LEFT until the
number you want to call is shown on the
bottom row of the display.
Press YES to make the call.
Note! If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key LEFT. The ‘Phone book’
menu appears.
Press YES to enter the ‘Phone book’ menu.
Press the navigation key LEFT until the ‘Dialled
numbers’ function appears.
Press YES to select the ‘Dialled numbers’ func-
tion.
Press and hold the CLR key. The question ‘Erase
all?’ appears.
Press YES to erase the last dialled numbers from
the memory.
Press CLR to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
10 Press to enter the menu system. See inside the cover.
Checking the first characters
If you have entered more characters than can beseen in
the display, the first characters will be replaced bythe
symbol. To check the first characters:
l press the navigation key
RIGHT.
Receiving a Call
When you receive a call, the phone ringsand the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note! The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Open the flip.
If the flip is already open; press
YES.
When the call is finished, press NO;
or close the flip.
Tip! To mute the ring signal when you receive a call, press
CLR.
To Reject the Call
There are two ways of rejecting the call:
• Press the
NO key.
• Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your I 888 WORLD conveniently lets you redial the last
phone numbers you have called (15 or more, depend-
ing on your SIM card). It can also redial a number auto-
matically if the connection failed when you firstcalled.
To Redial Previously Called Numbers
Press YES. The display now shows the last di-
alled number.
Press the navigation key RIGHT or LEFT until the
number you want to call is shown on the
bottom row of the display.
Press YES to make the call.
Note! If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key LEFT. The ‘Phone book’
menu appears.
Press YES to enter the ‘Phone book’ menu.
Press the navigation key LEFT until the ‘Dialled
numbers’ function appears.
Press YES to select the ‘Dialled numbers’ func-
tion.
Press and hold the CLR key. The question ‘Erase
all?’ appears.
Press YES to erase the last dialled numbers from
the memory.
Press CLR to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.