Filter
Top Products
Tip! If you enter a number in the scratch pad during a call,
you can store it in the Phone Book by selecting ‘Store’
from the ‘Phone book’ menu while you have the number
in the display.
Overwrite Protection
If you try to store a phone number in a position which
already contains a phone number, the message ‘Used
Overwrite?’ appears in the display. You then have two
options.
To store the number in a different position:
Press NO.
Enter the new position number.
Press YES
To store the number in the selected position, thus eras-
ing the old number:
l Press
YES.
When the Memories are Full
• If you try to store a phone number when all the
positions in the card memory are full, a position
number in the phone memory will be suggested on
the top row of the display.
• If both memories are full, no position number will
be suggested. If you still wish to store the phone
number, you have to erase the old number by en-
tering a position that is already occupied.
To Store a Number With a Tone Signal
Code
To use telephone banking services or control a phone
answering machine, you will need to use codes. These
codes are sent as tone signals (also called DTMF tones
or touch tones).
If you want to save the phone number in the Phone
Book with the codes:
Follow the instructions on how to store a phone
number until you enter the number.
After entering the phone number, press and
hold the key until the pause character ‘ ’
appears.
Enter the code.
If needed, insert another pause, another code
and so on.
Continue following the instructions on how to
store a phone number.
To make a call with tone signal codes, proceed as
described in ‘Making and Receiving Calls’. When you
make the call, the phone dials the number, waits until
the call is answered and then sends the code. If you in-
serted another pause and another code, it will pause
again, send the next code and so on.
Recalling a Phone Number
The Speed Dialling Facility
You can call the phone numbers that you store in the
positions 1–9 in the card memory by entering the posi-
tion number and then pressing YES. Therefore, you
should save positions 1–9 for important numbers.
For example:
If you want to call John, whose number is stored in posi-
tion 3 in the card memory:
Enter the digit 3.
Press YES.
To Recall a Phone Number Using the
Name
From the ‘Phone book’ menu, select ‘Name
recall’.
Press to enter the menu system. See inside the cover. 17