Ericsson T10s Cell Phone User Manual


 
Sending and Receiving Text Messages (SMS) 37
To read the message later
Press
NO
when you see the
Read now?
prompt.
The message is stored in the message memory as
New
and the envelope
icon appears at the bottom of the standby display.
Reading a Stored Message
1.
Scroll to
Mail
,
YES
,
Read messages
,
YES
.
2.
Scroll to the message you are looking for.
New
means an unread message.
Old
means a read message.
Sent
means a message that you have sent yourself.
To Send
means a message you have written, but not sent
If a message is stored on the SIM card, it is identified by a SIM Card icon.
3.
Press
YES
.
4.
Read the message as described in “Receiving a Message” on page 36.
To call a phone number found in a message
Press
YES
when the number is displayed.
Enabling the Phone to Send SMS
If you want to send or reply to a message, you need to make sure that the
service centre number is set. Most modern SIM cards already contain this
information at the time of purchase. You can obtain the service centre address
from your network operator.
To set the service centre address
1.
Scroll to
Mail
,
YES
,
Options
,
YES
,
Serv cent
,
YES
.
2.
If no number appears in the display, enter the number of the service centre,
including the international prefix, and press
YES
.
3.
Press
CLR
to return to standby mode.
Your phone is now ready to send text messages.
Replying to a Message
1.
Scroll to the end of the message.
The
Reply?
prompt appears.
2.
Press
YES
.
Your display now looks like the picture in the margin.
3.
Press
YES
and proceed as described in “Composing a Text Message” on
page 40.
If you do not want to reply
Press
NO
at the
Reply?
prompt.
Network
12:15
New
12:15
From: 123456
Options
< Serv cent >
(1234567)
<New>