Ericsson T10s Cell Phone User Manual


 
38 Sending and Receiving Text Messages (SMS)
Erasing a Message
1.
Scroll to the end of the message.
The
Reply?
prompt appears.
2.
Press
NO
.
The message
Erase?
appears.
3.
To erase the message from the message memory, press
YES
.
The next message automatically appears in the message list.
Tip!
You can press and hold
CLR
anywhere within the menu that handles
your message to erase it. When
Erase?
appears, press
YES
.
Storing Incoming Messages
If you do not want to read an incoming message at once, it is automatically
stored in the message memory in the phone. This allows you to read it later. If
there are any unread messages in the message memory, the envelope icon
appears at the bottom of the standby display. The message is stored in the
message memory as
New
.
The message memory can hold up to 10 messages. When all memory posi-
tions are full, the oldest read message is overwritten when a new message is
received.
If the message memory becomes full with unread messages, new messages are
automatically stored in the SIM card memory.
Messages remain in the message memory until you erase them (see “Erasing
a Message” on page 38), until you insert a different SIM card, or until the tel-
ephone needs the memory space to store new messages.
The SIM Card Memory
You can store important messages in a memory on your SIM card. This means
that you can find them no matter which phone you use. Messages that are
saved in the SIM card memory remain there until you erase them. The maxi-
mum number that you can store depends on your SIM card.
If the SIM card memory becomes full, the envelope icon starts flashing. The
text
Not stored Mem full
appears. You will have to erase one or more messages,
before you can store any new messages in the SIM card memory.
Network
12:15