Filter
Top Products
Not for commercial use – Ericsson Inc.
62 Data, Fax, and Internet Calls
signal will generally be stronger when the phone is near a
window.
In a Vehicle
It is possible to receive data calls from your vehicle.
Operation from a moving vehicle may not be satisfac-
tory because data may be lost when your call is trans-
ferred from one mobile base station to another. Be sure
to give full attention to driving and pull off the road and
park before making or receiving calls, if driving condi-
tions so require.
Transmission Disturbances
Brief interruptions of mobile telephone signals that
would not be bothersome during a voice call may cause
problems during data operation, depending upon the
error correction capabilities of the software being used.
Such interruptions are uncommon during stationary
operation, but can be caused by vehicles or people pass-
ing nearby, especially in areas of low signal strength. You
can use the signal strength indicator on your phone to
verify that you have a good signal path.
Installing Your Modem Driver From Your
Compact Disc
Windows 95
Complete the following steps to install the appropriate
modem driver (INF file) on your computer if you are
running Windows 95:
1
Turn On your Ericsson mobile phone.
2
Connect one end of your serial cable to your Erics-
son mobile phone and the other end to your com-
puter’s serial port.
3
Restart your computer. Windows will autodetect
your Ericsson mobile phone. When your desktop
returns, insert the compact disc from your DA 18
Phone Book Manager Accessory Kit. One of the fol-
lowing screens will appear:
• New Hardware Found
When the New Hardware Found screen appears,
choose Driver from disk provided by your hardware
manufacturer and click OK.
At the Install from Disk screen, type D:\ in the box
then click OK (if your CD-ROM drive is not drive
D, type the correct CD-ROM drive designation).
• Update Device Driver Wizard
When the Update Device Driver Wizard appears,
click Next.
Once Windows has found the driver, click Finish.