Filter
Top Products
4909 CPVC Conductivity Cell Insertion/Removal Assembly Operations Manual
4 4909 CPVC Conductivity Cell Insertion/Removal Assembly– Operations Manual 7/99
Cable
Conductivity
Cell
Adapter *
* Automatic Temperature Compensator,
when specified by catalog number, is
mounted inside adapter.
a
/
n 23352
Figure 1-4 4908 Conductivity Cell
Tighten securely to pipe
Do not nick
outside of
support tube
Note: Apply a thin film of Silicone grease
to all surfaces of bushing and to
diameter of support tube as shown.
These parts should be
hand-tightened only
Apply teflon tape to
both ends of support
tube. Tighten all pipe
thread fittings two turns
beyond hand tight.
Modify per sketch*
Apply grease
(See Note above)
Slice through one
side as shown
a
/
n 23353
*
Compression
Bushing
Figure 1-5 31074357 Removal Device