Filter
Top Products
4909 CPVC Conductivity Cell Insertion/Removal Assembly Operations Manual
10 4909 CPVC Conductivity Cell Insertion/Removal Assembly– Operations Manual 7/99
049
TABLE VII - OPTIONS
Tagging None 0_
Linen L_
Stainless Steel
S_
Certificate of Calibration No _ 0
Yes
_ 1
Notes:
1.
Replacement cells only, caution look at Restrictions for insertion depth dimensions based on valve
assembly type.
2.
When converting from 4806 to 4909, order 4908 directly.
3.
Replacement 4908 cells for existing 4908’s and 4909’s manufactured before 8/85 must specify Table V = 02.
4.
This option is application sensitive. You must contact Analytical Instruments Marketing for approval.
RESTRICTIONS
Restriction Letter Available Only With Not Available With
Table Selection Table Selection
c
V Standard insertion cell for SS valve assemblies consists of a conductivity
cell of variable length based on the cell constant and a 13.2" PES tube
molded to the cell. The conductivity cell insertion depth is listed below:
001, X01, XX1 = 7.5"
XX5 = 6.5"
X10 = 7.7"
X20 = 8.0"
X25, X50 = 8.8"
d
V Standard conductivity cell insertion depth dimensions according to cell
constants for CPVC assemblies is listed below:
001, X01, XX1 = 5.5"
XX5 = 4.5"
X10 = 5.7"
X20 = 6.0"
X25, X50 = 6.8"
e
V 02 I X25, X50
f
III For 9782 and 7082 Analyzers only
g
I Not for 9782 and 7082 Analyzers
h
V02
j
V03