Filter
Top Products
240 Programs
12.11 Sprite Backup
Use Sprite Backup to back up data, which includes settings, files, contacts, and all
other information, to the device memory, storage card or a computer.
Note If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you use Sprite Backup to back up your
files including settings, contacts and other information to your computer or a storage
card.
To install Sprite Backup
1. Make sure your device is connected to your computer via a USB cable.
2. Insert the Application disc on your computer’s disc drive and start the Sprite
Backup installation.
3. Follow the on-screen instructions to install the Sprite Backup PC Manager to
your computer and the Sprite Backup program onto your device.
To open Sprite Backup
On your device, tap Start > Programs > Sprite Backup.
Before you start to back up or restore files, please check the following:
Make sure that the device storage memory has at least 15MB of free space.
To check, tap Start > Settings > System tab > Memory > Main tab.
If you have a storage card installed, make sure that it has at least 100MB of
free space. To check, tap Start > Settings > System tab > Memory > Storage
Card tab.
To back up data
1. To back up data remotely to a computer, enable the PC backup feature first.
See “To enable remote backup to a computer” for instructions.
2. On the Sprite Backup main screen, tap Backup.
3. On the Backup Data Selection screen, you will see a tree view of the data and
files on your device. Tap “+” on the left of an item to view its sub-items.
•
•