Filter
Top Products
34 Getting Started
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1. Remove the back cover.
2. Insert the loop of the strap, lanyard
or string accessory through the
small hole at the bottom of the
back cover.
3. From the inner side of the back
cover, pull the loop and then
attach it over the strap holder’s
t-shaped hook as shown on the
illustration at the right.
Tip To attach the loop over the
t-shaped hook easier, push the
loop into the strap holder hole
using a pointed object such as a
needle.
4. Replace the back cover.