Filter
Top Products
22 Getting Started
To install the battery
Install the battery by inserting
it with its exposed copper part
aligned with the protruding copper
conductor on the lower-right side
of the battery compartment.
Insert the bottom side of the
battery first, then gently push the
battery into place.
Copper conductor
To replace the back cover
1. Secure the top part of the back
cover by ‘locking’ it into the 3
openings on the device.
2. Press the middle portion of the
back cover.
3. Press the bottom part of the
back cover to lock it into place.
You should hear a click.
2
3
To install the microSD™ card
1. Pry open the rubber cover at the
bottom-left side of the device.
2. Insert the microSD card with the
gold contacts facing up.
3. Close the rubber cover.
Tip Press the microSD card to pop it
out of the slot.