Filter
Top Products
80 Getting Connected
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations, you can use a Bluetooth hands-free
headset such as a car kit with your phone.
Your phone also supports A2DP (Advanced Audio Distribution Profile)
which is for stereo audio over Bluetooth. This means that you can use
a Bluetooth stereo headset with your phone for hands-free phone
conversations as well as for listening to stereo music. Make sure that your
stereo headset also supports A2DP.
Just like when connecting to any Bluetooth device, you also need to enter
a passcode when connecting to a Bluetooth hands-free or stereo headset.
The passcode is fixed and cannot be changed on a Bluetooth headset.
Before you connect it with your phone, check for the proper passcode in the
manufacturer’s documentation.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your phone and the Bluetooth headset are
turned on and within close range, and that the headset is visible.
Refer to the manufacturer’s documentation to find out how to set the
headset in visible mode.
2. On the Home screen, select Start > Settings > Connections.
3. Select Bluetooth > Menu > Devices.
4. Select Menu > New. Your device searches for other Bluetooth-
enabled devices and displays them in the list.
5. Select the name of the headset, and select Next.
6. In Passcode, enter the alphanumeric passcode (usually 0000 or 1234)
for the Bluetooth headset and select Next.
7. Select the check box for the Hands Free service, and select Done.