Filter
Top Products
32 Customizing Your Phone
4. Select Yes to erase all contacts. A message
appears: “Erase ALL Contacts?”
5. Select Yes again to erase all contacts.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line has
its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Note: You must first establish a second phone line
with Verizon Wireless. Once established, a second
phone number becomes available in the menu for
selection.
1. Select Menu → Settings → Network →
Set Phone Line.
2. Select one of the two lines and press .
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with a
TTY device.
1. Connect the TTY device to the phone.
2. Enter from
your keypad.
3. Select the TTY option.
4. Press to clear the message.
5. Highlight an option and press .
Note: TTY/TDD service may not be available. Check
with Verizon Wireless for more information.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.) in
markets where service has been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu → Settings → Network →
Location.
2. Select 911 Only or Location On.
– 911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code
(911, 000, 111, etc.).
–
Location On shares your position information
with Verizon Wireless’s network in addition to
emergency services.
82-N8271-1EN.book Page 32 Wednesday, September 14, 2005 2:53 PM