Filter
Top Products
User Guide 45
– Multishot takes up to six multiple pictures
with the
Camera key pressed and held. A
tone plays each time a picture is taken. A
second tone plays when the final picture
is taken.
–
Shutter Sound sets the sound used when
the camera takes a picture.
–
White Balance adjusts the camera for
different lighting.
–
Color Tone sets the color tone of
the picture.
–
Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
When set to
High, the picture file size is
larger, using more memory.
–
LED flashes the indicator light when taking
a picture.
–
Viewfinder Display sets the camera
viewfinder as
Fullscreen or Actual.
•
Brightness adjusts the brightness of the image
in the home screen LCD.
•
Camera Pictures displays all pictures taken
and stored.
•
Last picture displays the most recently
taken picture.
•
Frames adds a frame or a stamp to your
picture. A frame or stamp cannot be removed
once it has been used in a picture. The picture
resolution changes to
120 x 160 (with the
number keypad) or
160x120 (with the
QWERTY keypad) while taking pictures with
Frames enabled. The resolution returns to the
original setting with
Frames disabled.
Note: The following settings revert to the default
setting each time you enter and exit the camera
application:
Low Light Mode, Self Timer,
MultiShot, and Viewfinder Display.
Camera indicators and icons
The camera may display the following on screen
indicators and icons.
Note: Numbers in the top right corner indicate
the number of snapshot remaining. Numbers in
the bottom left corner indicate the resolution
setting for pictures.
Flash is on.
Camera is in camera mode.
Multishot feature is on.
Self-timer feature is on
Camera zoom mode is ready.
82-G1934-1EN.book Page 45 Sunday, October 14, 2007 6:19 PM