Kyocera M1000 Cell Phone User Manual


 
User Guide 63
Com Port Speed
The Com Port Speed sets the data rate at which
your phone connects to a laptop or PC, or at
which it sends and receives over-the-air text
messages. Select
Menu > Settings >
Accessories > Com Port Speed and your
desired speed.
There may be a higher charge for making calls
using high-speed data in areas where 1X service
is available. Check with your service provider
for details.
TTY Device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Select
Menu > Settings > Accessories >
TTY Device (or enter ##889 from the home
screen and select
TTY) > OK > TTY On.
T-coil Hearing Aid
You can use your phone with a T-coil Hearing Aid
device. Select
Settings > Accessories >
T-coil Hearing Aid > OK > Enabled.
Note: Enable T-coil Hearing Aid only when using
the phone with a T-coil Hearing Aid device.
Network
Data and fax calls
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note: To purchase a cable,
visit
www.kyocera-wireless.com/store.
To enable data/fax mode, select Menu >
Settings > Network > Data/Fax Calls and one of
the following:
Voice Only turns data/fax mode off.
Fax, next call or Data, next call sets the
phone to data/fax mode for the next incoming
call or the next ten minutes.
Fax, until off or Data, until off sets the
phone to data/fax mode until the phone is
turned off.
Privacy Alert
You can set your phone to alert you when
enhanced digital CDMA privacy is lost or
regained. Select
Menu > Settings > Network >
Privacy Alert > Enabled.
82-G1934-1EN.book Page 63 Sunday, October 14, 2007 6:19 PM